RoHS Compliant

ISO 9001:2000 Certified

Established 1985

Flat Flex
Cable

MJM offers a complete line of Flat Flex cable assemblies to meet your every need. The folding and flexing features of the laminated cable will easily solve your most difficult mechanical routing requirements. They save space and are easy to install. Flat Flex is ideal for board to flat panel display and board to board connections.

 

Standard Features:

  • Made in USA
  • RoHS Compliant
  • 31, 41, & 51 position male and female connectors
  • 0.5mm pitch laminated polyester ribbon cable
  • Optional ZIF ends with traditional tape backing to mate with 0.5mm pitch ZIF connectors
  • One piece over-molded strain reliefs
  • Custom length and fold options available
  • Shielding, grounding, drain wire options and ferrites are available
  • Meets FPDI-1 and VESA standards
  • Materials are UL listed
  • Pinout: One-to-one or reverse
  • Connector orientation: Same side or opposite side
  • Connector direction: Same, both out, both in, one out

Optional Features:
  • Ferrites
  • Separated lead ends
  • Foil shields

Connectors:
  • Specialty pinouts
  • Selective grounding
  • Custom cable lengths
  • MJM uses Hirose DF9 connectors-31, 41 & 51 positions

Electrical Specifications:
  • Contact resistance-30 milliohm (maximum)
  • Dielectric withstanding voltage-300V RMS (minimum) @60 HZ
  • Current rating-0.50 AMPS
  • Insulation resistance-> 109@500V DC

Contacts:
  • Material: Copper alloy
  • Finish: Tin
  • Insertion force-197 grams 6.94 oz. / .4343 lbs. nominal
  • Withdraw force-30 Grams

Cable:
  • Insulator: Polyester
  • Conductor: Flat solid 33 AWG equivalent
  • Plating: Tin
  • Length tolerances: under 12” +/- 0.10”, over 12” =/- 0.25”
  • Length is measured from end to end in inches including connectors

Environmental:
  • Materials: UL flame rating 94V-1
  • Temperature rating: -40 C to +105C
  • RoHS Compliant

PRODUCT LINE 31, 41 & 51 ( Click on image for a larger view)

                               A               B         # OF POSITIONS

        .87            .60                  31

        1.07           .85                  41

        1.29           1.07                  51 

TAPE ZIF ( Click on image for a larger view)

                               A               B         # OF POSITIONS        

                             .610         .675                   30 

                             .807         .780                   40

Separated Leads

MJM also offers an assortment of Separated Leads. The application for Separated Lead Assemblies is primarily for liquid crystal displays to display controller boards. They are ideal for transitioning from DF9 series connectors using 0.5 mm pitch flat flex cable to any other style of connector.

Features:
  • Available in 31 and 41 position sizes
  • Direct attachment of the connector to the cable eliminates the need for a transition board
  • Separated Leads allow you to wire the assembly with any pin out required
  • Optional split length ensures that you have enough discrete length to handle any routing issues
  • The connector meets FPDI-1 standards
  • The connector has a low profile for limited space allocations

Separated Leads ( Click on image for a larger view)

MJM Industries, Inc.
1200 East Street
Fairport Harbor, Ohio 44077
sales@mjmIndustries.com
 
Phone: 440-350-1230        Fax: 440-350-1360